• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Ziplevel

                                  Measures over any distance or elevation on earth without calculations.       True one person operation.

Unlike a rotary laser, ZIPLEVEL lets you truly work alone to quickly and easily level and read elevations

directly in unmistakably clear digits.

NO MORE rods, tripods, sensors, line-of-sight, error with distance, factory calibration or tedious computations.

Decade proven by tens of thousands world wide who depend on ZIPLEVEL as the "tape rule" of elevation measurement.

Fast, powerful, proven, rugged, reliable, affordable with a two year factory warranty.*

Cut costs, boost profits and join the measurement revolution.

Whether you're supplementing or replacing a laser, you can't afford to be without ZIPLEVEL!

*Two year pro-rata warranty on hydro-pneumatics and a one year factory warranty on remainder of instrument.

The ZIPLEVEL PRO-2000 Precision Altimeter is a revolutionary laserless digital level and elevation measurement system designed to save significant time and money on the job site. Unlike a conventional rotating laser or builder's level, ZIPLEVEL allows true one person operation, does not require line of sight or factory calibration and does not amplify error over distance. ZIPLEVEL is extremely fast and easy to use, has numerous powerful built in functions including a PC interface and is built job site rugged.

Features

True one-person operation

Displays elevations directly with 1/8" (2mm) precision

"Sees" around or over visual obstructions

Setup vertical range is equivalent of a 40' (12m) ROD & 20' (6m) Tripod

Measures over any elevation or distance on earth without calculations

Built job-site rugged & never needs factory calibration

Has numerous powerful built-in functions & PC interface

Powerful built-in functions

AUTO-OFF  Shuts unit off after 4 min. without movement or key presses to preserve battery.

HOLD  Freezes the display if not in view, also used with other functions.

ZERO  Sets display to read zero at a reference, the same as setting the target on a rod.

SCALE  For readings in fractional or decimal inches, feet or meters.

RES  For faster, less precise rough readings.

MARK  Lets you sound leveling or limit tones to supplement the display.

RECORD  Gives Average, Minimum or Maximum of any number of readings.

CAL  Calibrates accuracy of vertical readings – like calibrating a rod.

TEMP  Displays ambient temperature – useful in concrete work or with adhesives.

ADDER  Adds case dimension for inside readings.

CARRY  Allows unlimited ranges without tabulation or calculation.

ELEVATION  For setting readings in sea level elevation at a known survey monument.

RECORD DATA  Stores up to 137 readings for later recall.

INSPECT/DUMP  View stored data or dump to PC for tables, profiles, 3D or Topo maps.

MONITOR  Logs data on a PC to monitor levels of tanks, lakes or streams.

Specifications

SETUP/PACK-UP TIME: Typically less than 30 seconds to unpack, zero and read.

RANGES: 40’ vertical by 200’ horizontal circle,  unlimited ranges in CARRY function.

TYPICAL ISOTHERMAL ACCURACY: Greater of 0.1” or 0.15% of measured elevation.

TEMP. RANGE: -22F to 158F (-30C to 70C) operating; -40F to 158F (-40C to 70C) storage.

DROP RESISTANCE: 5’ (1.5m) for Measurement Module or 3’ (0.9m) for Base Unit onto concrete.

WATER RESISTANCE: Can be lightly rinsed with a hose but cannot be immersed.

9V BATTERY LIFE: 1 year of typical daily use.

MEMORY LIFE: Saves latest data and settings indefinitely even without a battery.

PC SERIAL PORT: IR output for optional PC Serial Interface cable.

UNIPOD LENGTH: 15” (38.1cm) to a calibrated 48” (121.9cm)

WEIGHT: 12 lbs. (5.50 kg) total weight; 1 lb (0.45 kg) for the Measurement Module.

SIZE: 16.0”H x 10.5”W x 7.5”D (40.6cm x 26.7cm x 19.1 cm) for Base Unit; 3.75”H x 4.75”W x 1.75”D

   (9.5cm x 12.1cm x 4.5cm) for Measurement Module with boot.

WARRANTY: One year parts & labor for mfg defects; 2 year prorated for hydro-pneumatic parts & labor.